Category Archives: Technical

images-9

Ice Machine

Source text – English Location of Ice Machine Head Section The location selected for the ice machine head section must meet the following criteria. If any of these criteria are not met, select another location. The location must be free of airborne and other contaminants. The air temperature must be at least 1.6 degree C […]

Read More

images-10

Water Purifier

Source text – English PRODUCT AND PROCESS DESCRIPTION Product Description The X Option-E water purification unit has been specifically designed to provide a supply of high purity water suitable for general laboratory use. The XX Option-E can be bench or wall mounted and an optional wall mounting kit is available. A range of accessories are […]

Read More

images-12

Boat Brochure

Source text – English Simple Installation Remove existing drive from the boat, following the instructions in your Volvo manual. • Split the drive; remove the centre section; clean and prepare all mating surfaces. • Fit the new XX unit, using the new ‘O’ ring seals, shims and sealant provided. • Adjust the helm controls for new […]

Read More

images-11

The Pure Water Guide

Source text – English 1 Introduction In today’s laboratories the availability of pure water is essential. While the domestic consumer considers tap water to be “pure”, the laboratory scientist regards it as grossly contaminated. It is common for analytical and experimental scientists to be concerned with elements and compounds at concentrations in the parts per […]

Read More

images-13

Boat Drive Installation Instructions

Source text – English Simple Installation Remove existing drive from the boat, following the instructions in your Volvo manual. • Split the drive; remove the centre section; clean and prepare all mating surfaces. • Fit the new StepDrive unit, using the new ‘O’ ring seals, shims and sealant provided. • Adjust the helm controls for […]

Read More

images-14

Finning Tube Machine

Source text – English The XXY applied tube finning machine is a miniature high speed rolling mill synchronized with the rotation and advance of the tube. Quick change, steady rest input and output racks, allow the tube to rotate at up to 3000 RPM for 1” tube. Strip is fed to the machine from a […]

Read More

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close